The frequent issues caused by the printer are given below, try to sort out the HP Envy 4520 troubleshooting issues with our user manual.


TOLL FREE :1844 968 2988

HP Envy 4520 Printer Offline (Windows)

An Offline status shows that the computer is not able to transmit information to the printer.

  • Use HP Print and Scan Doctor to verify connectivity.
  • Customize the default printer.
  • Reconfigure the printer and verify the connection status.
  • Ensure that the appropriate port is selected. This applies to USB connection and network connection.
  • Upgrade the printer firmware.
  • Develop a manual connection (network connections only). You can perform actions including printing a Network Configuration Report or Wireless Test Report. On the report printout, observe the network status for your network connection type and then HP Envy 4520 troubleshooting accordingly.
  • Include a second printer device to Windows (network connections only) and set up the device again using the HP printing software.

HP Envy 4520 not printing correctly

Sometimes it may happen that the printer program may not not withstand the travel to the new Operating System i.e. at the time of migrating to Windows 10.Suppose you upgraded the OS to Windows 10 and then instantly attempted to set up a new copy of the Full Feature Software, then the fresh Operating System might not have sufficient time to carry out Windows Updates. Actually, the new Windows 10 requires the necessary Updates prior to getting equipped for the printer to get installed on it.

You can contemplate over the following things when the printer not print after migrating to Windows 10

  • Develop a Restore Point.
  • Delete existing printer programs.
  • Restart the printer.
  • Set up new copy of the Full Feature Software.

Printer Offline (Mac)

There are also chances that the printer might go offline all off a sudden in certain network conditions known as HP Envy 4520 troubleshooting.

  • Verify connection between the printer and Mac.Carry out a power reset.
  • Eliminate extra entries from the printer list.
  • Create a new printing session.
  • Attempt resetting the printing system.

Wireless Printing Problems

You would have purchased a new HP Envy 4520 wireless printer and you may face issues due to network connectivity problems.

  • Restore the setting on your router and the printer.
  • Uninstall and then reinstall HP Envy 4520 printer.
  • Key in the proper IP address and configure a static IP address.
  • Attempt disabling the firewall.
Printing Blank Pages

Printing blank pages is one of the issues found in a printer. Sometimes, an additional blank page prints after each print job. Follow these steps to resolve this issue.

  • Upgrade your computer antivirus software and the printer firmware. In case your printer is linked to the computer by means of a USB cable, detach the cable from the printer. Navigate to our site’s Software and Driver Downloads part. Tap Firmware in the Downloads page, and then tap Download. You can make use of the HP Download and Install Assistant or choose Download only option.
  • Remove the printer software and reinstall it through the Software and Driver Downloads section in our site.
  • Print straight to the printer.
  • Print directly to the printer by modifying the printer spooler option in print properties.